Category Reference Hub
Concrete & Cement Products
Density & Volume Reference
Precise density reference data for 30 common substances. Convert mass to volume instantly with exact temperature-calibrated specific gravity values.
30Substances
20°CReference Temp
±0.001Precision (kg/L)
⚖️ Convert Mass to Volume (Concrete & Cement Products)
Select substance and input mass for instant conversion
kg
▼
Resulting Volume
1.000Litres
HTML5 Canvas Volume Visualization1.000 L
Density:1.000 kg/L
Temperature:20°C
Formula:V = m ÷ ρ
📊 1 kg Volume Comparison (Concrete & Cement Products)
See how 1 kg of each substance in this category occupies different volumes
📋Concrete & Cement Products Density Directory
Full reference density table for Concrete & Cement Products
| Substance | Density (kg/L) | 1 kg Volume | Ref Temp | Notes / Specification |
|---|---|---|---|---|
| Portland Cement (Dry) | 1.44 kg/L | 0.694 L | 20°C | Binding agent, powder bulk density |
| Portland Cement (Slurry) | 1.5 kg/L | 0.667 L | 20°C | Grouting, mixed with water |
| Concrete (Standard, Wet) | 2.4 kg/L | 0.417 L | 20°C | Structural, 3000-4000 psi, strength 25 MPa |
| Concrete (Standard, Cured) | 2.3 kg/L | 0.435 L | 20°C | Structural dry weight, strength 30 MPa |
| Concrete (High Strength) | 2.45 kg/L | 0.408 L | 20°C | High-rise, 6000+ psi, strength 65 MPa |
| Concrete (Lightweight) | 1.8 kg/L | 0.556 L | 20°C | Non-structural, expanded shale/clay |
| Concrete (Heavyweight) | 3.6 kg/L | 0.278 L | 20°C | Radiation shielding, baryte aggregate |
| Concrete (Fiber-Reinforced) | 2.4 kg/L | 0.417 L | 20°C | Slabs, pavements, steel/glass fibers |
| Concrete (Pervious) | 1.9 kg/L | 0.526 L | 20°C | Drainage, no fines, strength 15 MPa |
| Concrete (Self-Compacting) | 2.4 kg/L | 0.417 L | 20°C | Complex forms, high flowability |
| Concrete (Shotcrete) | 2.35 kg/L | 0.426 L | 20°C | Tunnels, slopes, sprayed concrete |
| Mortar (Type N, Dry) | 1.3 kg/L | 0.769 L | 20°C | General masonry, 1:1:6 mix |
| Mortar (Type N, Wet) | 1.8 kg/L | 0.556 L | 20°C | General masonry mixed, w/c 0.60 |
| Mortar (Type S, Dry) | 1.35 kg/L | 0.741 L | 20°C | Structural masonry, 1:0.5:4.5 mix |
| Mortar (Type S, Wet) | 1.85 kg/L | 0.541 L | 20°C | Structural masonry mixed, w/c 0.55 |
| Mortar (Type M, Dry) | 1.4 kg/L | 0.714 L | 20°C | Load-bearing, 1:0.25:3 mix |
| Mortar (Type M, Wet) | 1.9 kg/L | 0.526 L | 20°C | Load-bearing mixed, w/c 0.50 |
| Mortar (Type O, Dry) | 1.25 kg/L | 0.800 L | 20°C | Non-structural, 1:2:9 mix |
| Grout (Cementitious, Dry) | 1.5 kg/L | 0.667 L | 20°C | Anchoring, high strength |
| Grout (Cementitious, Wet) | 2.1 kg/L | 0.476 L | 20°C | Anchoring mixed, w/c 0.40 |
| Grout (Epoxy, Liquid) | 1.2 kg/L | 0.833 L | 20°C | Structural repair, two-part |
| Grout (Non-Shrink, Dry) | 1.45 kg/L | 0.690 L | 20°C | Equipment bases, expansive |
| Stucco (Dry) | 1.2 kg/L | 0.833 L | 20°C | Exterior finish, lime/cement-based |
| Stucco (Wet) | 1.6 kg/L | 0.625 L | 20°C | Exterior finish applied, w/c 0.50 |
| Plaster (Gypsum, Dry) | 1.2 kg/L | 0.833 L | 20°C | Interior finish, powder |
| Plaster (Gypsum, Wet) | 1.6 kg/L | 0.625 L | 20°C | Interior finish mixed, w/c 0.60 |
| Plaster (Lime, Dry) | 1.15 kg/L | 0.870 L | 20°C | Historic plaster, traditional |
| Plaster (Lime, Wet) | 1.5 kg/L | 0.667 L | 20°C | Historic plaster mixed, w/c 0.65 |
| Cement Board (Dry) | 1 kg/L | 1.000 L | 20°C | Tile backing, 1/2 in thick |
| Cement Board (Wet) | 1.2 kg/L | 0.833 L | 20°C | Tile backing, moisture absorbed |
Showing 30 substances in Concrete & Cement Products|Density range: 1.000 - 3.600 kg/L|Most dense: Concrete (Heavyweight)